Is the PFR2190 Freeman a Good Framing Nailer?

Every construction and woodworking company knows that a good set of power tools is needed for accurate and efficient work. The ability to quickly hit nails with a tool instead of shaving them by hand reduces countless hours of work on any project while improving driving accuracy. One of the most important tools in the toolbox for this purpose is a frame nail like the Freeman PFR2190.   But will that put the nail together? And how does that compare to other cloves on the market? In this article we will take a closer look at and compare the Freeman PFR2190 to answer your questions.

What is the Freeman PFR2190?

The Freeman PFR2190 is a joiner’s nail, a pistol-shaped woodworking tool used to hammer nails into wood. This considerably speeds up the process of nailing large pieces of material. It is normally used for heavier construction projects.

How it works

about the GIFI

This tool uses air compression to drive the nails into the shaft at high speed. The nails are driven from a large cylinder located directly above the tip. When you are ready to pull, point the cylinder and the tip of the nail in the direction in which you will guide the nail. Before pulling the trigger, hit a nail into the tree to push the tip, blowing out a single nail. Ideally, press the head of a nail against a shaft of about 1/8 inch. Then repeat this procedure for the other nails you need.


The nail frame can be used for two types of fixings: with nails and with nails. Using nails, you can hit one nail perpendicular to the surface of the wooden board into the other nail. If you nail it, beat it diagonally into a board of wood. It can be used for projects such as siding, roofing, fencing, framing or even wall cladding.


Always wear protective equipment such as goggles, hearing protection, gloves and close-fitting clothing when using this device. Also read the manufacturer’s instructions carefully before use and follow all instructions carefully. This frame nail is equipped with safety devices such as the nail tip. Never let go of the tip of the nail or pull on the tip of the nail during shooting to greatly reduce the risk of injury.

Advantages and disadvantages

One of the advantages of pneumatic chassis bits over other types of chassis bits, such as battery- or fuel-operated chassis bits, is that they generally have more power and are also faster due to the use of compressed air. However, they require a long hose to be connected to an air compressor, making them less portable than other types.

Freeman PFR2190 Specifications


about the GIFI

The Freeman PFR2190 is pneumatic, i.e. it is connected manually to an air compressor by means of a hose. He weighs 17 pounds and measures 12 x 18 x 2. He is black and orange and has a kind of scratched nail. It is suitable for 21 degrees solid nails with a minimum of 2 inches to a maximum of 3.5 inches.

The body is made of magnesium, which reduces the weight of the tool and increases its durability. The guide blade is made of heat-treated high-strength steel and the cylinder of anodised aluminium. The orbital rings are made of Teflon. High quality materials ensure that the performance of the tool remains at the right level.

Read More Related Guides  Best Stapler to 50 Pages


The nail also comes with a 360 degree adjustable ventilation hole to prevent moisture stains on the surface of the wood. It has an interchangeable trigger that makes it possible to switch from contact to single shot. A dust cap and air filter prevent damage to the driver. It is also equipped with a rubber-free rubber tip to prevent damage to the wood surface. The dry fire protection system stops the fire when you reach the last three nails, preventing blockages and damage. You can expect all these features from a high-end manicure gun.


The Freeman PFR2190 is for sale for $ to $, making it very affordable compared to other chassis nacelles. This nail can be found on Amazon and other online stores such as eBay,, and others. It can also be found in shops and household stores such as Walmart.

Compared to

We have selected a number of similar products on the market to see how they compare with each other.

  • DEWALT DCN692M1 20V MAX XR Double speed frame nail
  • Hitachi NR90GR2 gas strips plastic stripes collection frame eye
  • Nail for the BOSTITCH frame

Free man PFR2190

Easy to use ****

We have made it easy to use 4 stars because it is connected to an air compressor and uses rail nails.

Nail capacity and versatility ****

We gave the nails the capacity and versatility of 4 stars, because it can contain 80-100 nails, but only needs nails with a full head of 21 degrees.

Design quality *****

We have awarded the design quality of 5 stars because of the high quality, the strength of the materials and the variety of specifications.

Guarantee *****

We offer a 5-star warranty with a 7-year limited warranty.


  • Affordable
  • Made of high quality and durable materials
  • Adjustable exhaust air vents
  • Interchangeable version
  • Air filter and dust cap
  • Non-slip rubber nose
  • Fire-fighting system
  • 7-year limited warranty.
  • With 80-100 nails


  • Only 21 firm nails will be accepted.
  • Some users report problems with double-shooting

Development DCN692M1 20V MAX XR Two-speed nail milling cutter


The DEWALT DCN692M1 Dual Speed Battery Powered Frame Nail is suitable for all brands of nails from 30 to 34 degrees. Thanks to its brushless motor and design, it can drive 3.5-inch nails. The brushless two-speed motor automatically calculates the size of the nail and adjusts the firepower for each nail. It runs on a 20-volt Li-Ion battery and weighs 7.8 pounds, making it lightweight. The tip of the nose is easily accessible to remove stuck nails.


DEWALT DCN692M1 has two modes of action: sequential and shock resistant. The sequential mode enables precise positioning, while the collision mode ensures production speed. It has a shutter lock function that allows you to turn off the device when it is not in use. It also includes tool-free depth adjustment for greater accuracy, a dry-fire lock, rack and pinion release lever and an adjustable chevron hook for transport.

Easy to use *****

We gave him 5 stars because he runs on batteries and is easy to charge.

Read More Related Guides  Stanley TRE550z Electric Sticker / Brad Nail Gun Review

Nail capacity and versatility ***

We gave the nails the capacity and versatility of 3 stars, because although it contains only 55 nails, it is a good choice for any brand.

Design quality *****

We have achieved a 5-star design quality thanks to the two-stage brushless motor with different specifications.

Warranty ***

We gave a three-star warranty because it’s limited to three years.


  • Lightweight and portable
  • Only one battery
  • Brushless two-speed motor
  • Offers a good range of sizes for all nail brands
  • Two modes of action
  • Depth adjustment without tools
  • Dry fire hatch
  • Adjustable chevron hook
  • Pressure lever with lock
  • The package contains a portable case
  • 3-year limited warranty


  • He only has 55 nails.
  • Some users report problems driving with 3.5 inch nails.
  • More expensive than other drivers

Hitachi NR90GR2 Plastic Belt with Gas Drive Collected Frame Nail


The Hitachi NR90GR2 is lightweight and compact, making it easy to install in tight spaces. It weighs only 3.5 kg and has an elastomer handle that reduces vibration and accidental slipping.

It is rechargeable and powerful, with a 7.2V nickel-cadmium battery and fuel cartridges. This battery and fuel capacity allows you to hit 1,000 nails at 21 degrees (up to 3.5 inches long) per hour. One nail can work up to 4 hours per charge, allowing 4,000 nails to pass through before charging. It can also hit two nails per second, which makes work quick and easy.

This requires not only Hitachi cartridges, but also Bostitch and Paslode cartridges. Accessories such as cleaner/hydrator, fuel cell, 4 mm Allen key, safety goggles, nail lubricant and carrying case are included in the scope of delivery.


The outstanding performance of the Hitachi NR90GR2 includes a dry shutter that stops the tool from firing when five nails remain in the belt, allowing the tool to be secured while preventing damage to the tool and work surface. It features a dual ignition mode (shock and sequential) for versatility and tool-free depth adjustment for excellent accuracy. The indicator warns of a low battery level to prevent the battery from being unexpectedly discharged in the middle of the project.

Easy to use *****

We have awarded him 5 stars for his ease of use, as he is wireless and easy to charge and charge.

Nail capacity and versatility ***

We gave the nails 3 stars for resilience and versatility, because they only need 21 degrees when the head is full.

Design quality *****

Thanks to its light weight, ergonomic design and good technical properties, we have awarded 4 stars to the quality of the design.

Warranty **

We gave a two-star warranty because there is only one year warranty.


  • A powerful battery
  • Portable, compact and lightweight
  • It reaches 4,000 nails with a single charge in 4 hours.
  • Accepts Paslode and Bostitch fuel cartridges
  • Many accessories are included
  • Block with dry fire
  • Double combustion
  • Adjusting the depth without tools
  • Control lamp


  • Expensive first purchase
  • Replacing fuel cells can become expensive over time.
  • Because of the louder fuel cartridges than other guns.
  • Not suitable for longer projects for cost reasons
  • 1 year warranty

Nail for BOSTITCH frame


The BOSTITCH F21PL is another pneumatic nail for the frame, but at 8.1 lbs it is lighter than the Freeman PFR2190. The magnesium construction makes it both light and durable, and the non-slip pads and rubber handle make it safe and easy to use. Works with nails at 21 degrees in a size range from 1.5 to 3.5 and has a driving force of 1050 in/lbs. It is equipped with two quick-change noses, which make it possible to change between the metal connection and the plastic nails.

Read More Related Guides  Senco SNS41 16-G Construction Sticker Review


The BOSTITCH F21PL is equipped with features such as a tool-free depth adjustment of the drive for easy and convenient operation. You can also switch from a single drive mode to multiple modes by simply pressing the shutter release button. It contains an adjustable hook from which the rafter can be hung when working on projects.

Easy to use ****

We made the 4 stars easy to use because it is connected to the air compressor and the charger is easy to charge.

Nail capacity and versatility ***

We gave the nails the capacity and versatility of 3 stars because it can contain up to 20 plasticized nails and 60 metal nail connectors and only works with 21 degree nails.

Design quality ***

We gave it a 3-star design quality because, despite its low weight, it lacks some of the extra features of other frame nacelles and because it is bulky in design.

Guarantee *****

We gave a 5-star guarantee because there is a 7-year guarantee on it.


  • Lightweight compressed air gun for nailing.
  • Magnesium Structure
  • Rubber handles and armour protectors
  • 1050 in/lbs Drive power
  • Rapid nostril changes.
  • Depth adjustment of the drive system for non-sharp tools
  • Tool-free ignition switch
  • Adjustable chevron hook


  • The continuous recording mode may be difficult to start.
  • Carrying case not included
  • More noise than the other nail guns.
  • Large-scale design
  • Slow pricing
  • Capacity of 60 nails

Conclusion: Our Freeman PFR2190 evaluation

After careful examination and comparison of the Freeman PFR2190 with other frame nacelles, we give it a rating of 4 stars out of 5. It is made of high quality, durable materials that ensure stable and long-lasting operation. It also has many of the technical and safety features found on high quality frame nacelles, such as a replaceable tractor, adjustable exhaust manifold, rubber anti-adhesive valve, air filter and dust cap, as well as a dry fire protection system.

Despite the fact that the nails have a lack of strength and versatility and that double firing causes problems, the richness of technical features and the excellent design of this affordable nail frame make it a profitable investment for both professionals and beginners.



best framing nailer,how to choose a framing nailer

Disclosure: We are a professional review company & our reviews are not biased towards any of the products we review. We test each product thoroughly and give marks to only the very best that is given by our author. We are very independently owned & the opinions expressed here are our own. However, if you purchase anything after clicking the links present in the articles then we get some commissions for it which help maintaining the websites expenses like servers, security etc.

Like it? Share with your friends!